Safety Information

Always read the manual carefully before use. Ensure the spa is placed on a smooth, stable surface to avoid damage. Keep electrical components dry and avoid overheating. Never use the spa near open flames or sparks. Regularly inspect the heater and filtration system for proper function. Important: Follow all safety guidelines to prevent accidents and ensure optimal performance.
Keep children and pets supervised at all times while the spa is in operation.
Never exceed the maximum weight capacity of the spa.
Always turn off the heater when not in use.
Ensure proper ventilation in the area to prevent carbon monoxide buildup.
Do not use the spa if you have open wounds or certain medical conditions without consulting a doctor.
Regularly test and maintain the water chemistry to ensure safety and hygiene.
Never leave the spa unattended while it is inflated or in use.
Follow all local electrical and safety regulations.
Always unplug the spa during cleaning or maintenance.
Keep the spa away from direct sunlight to prevent overheating.
Never use the spa during thunderstorms or extreme weather conditions.
Always follow the manufacturer’s instructions for inflation, deflation, and storage.
Inspect the spa regularly for signs of wear and tear.
Do not use abrasive cleaners or sharp objects that may damage the spa material.
Always drain and clean the spa after each use to prevent bacterial growth.
Follow the recommended temperature settings to avoid scalding or discomfort.
Never use the spa if it is damaged or malfunctioning.
Always store the spa in a dry, cool place when not in use.
Keep the spa away from pets and animals that may puncture or damage it.
Never use the spa if you are under the influence of alcohol or drugs.
Always follow the manufacturer’s guidelines for the number of users.
Regularly check the spa’s power cord and connections for damage.
Never use the spa if the power cord or controls are submerged in water.
Always ensure the spa is properly grounded to prevent electrical shock.
Follow all safety precautions when handling chemicals for water treatment.
Never use the spa if the water temperature exceeds the recommended level.
Always follow the instructions for the filtration system to maintain clean water.
Keep the spa cover securely in place when not in use to prevent accidents.
Never use the spa if the pump or heater is not functioning properly.
Always follow the manufacturer’s instructions for troubleshooting and repairs.
Regularly check the spa’s pressure and adjust as needed to prevent over-inflation.
Never use the spa if the inflation valve is damaged or leaking.
Always follow the recommended maintenance schedule to ensure the spa’s longevity.
Keep the spa away from sharp objects, heat sources, or flammable materials.
Never use the spa if the control panel is damaged or malfunctioning.
Always follow the instructions for deflating and storing the spa during winter.
Regularly inspect the spa’s walls and floor for punctures or tears.
Never use the spa if the water is cloudy, dirty, or has an unusual odor.
Always follow the manufacturer’s guidelines for the use of accessories and attachments.
Keep the spa in a well-ventilated area to prevent the buildup of harmful fumes.
Never use the spa if the electrical components are exposed or damaged.
Always follow the instructions for cleaning and maintaining the filtration system.
Regularly check the spa’s temperature to ensure it is within the safe range.
Never use the spa if the water level is below the minimum recommended level.
Always follow the manufacturer’s instructions for the use of chemicals and treatments.
Keep the spa away from children when it is not in use.
Never use the spa if the pump is not functioning properly.
Always follow the instructions for the proper use of the massage jet system.
Regularly inspect the spa’s hoses and connections for leaks or damage.
Never use the spa if the heater is not working correctly.
Always follow the manufacturer’s guidelines for the use of the spa in extreme weather.
Keep the spa in a shaded area to prevent overheating from direct sunlight.
Never use the spa if the control panel is wet or damaged.
Always follow the instructions for the proper use of the filtration system.
Regularly check the spa’s water level to ensure it is within the recommended range.
Never use the spa if the water is freezing or below the recommended temperature.
Always follow the manufacturer’s instructions for the use of the spa in winter conditions.
Keep the spa away from open flames or sparks to prevent fires.
Never use the spa if the electrical components are submerged in water.
Always follow the instructions for the proper use of the spa’s electrical system.
Regularly inspect the spa’s walls and floor for signs of wear and tear.
Never use the spa if the material is cracked, torn, or damaged.
Always follow the manufacturer’s guidelines for the use of the spa’s accessories.
Keep the spa in a clean and dry environment when not in use.
Never use the spa if the heater is not functioning properly.
Always follow the instructions for the proper use of the spa’s temperature control system.
Regularly check the spa’s filtration system to ensure it is working correctly.
Never use the spa if the water is contaminated or has an unusual smell.
Always follow the manufacturer’s guidelines for the use of the spa’s water treatment systems.
Keep the spa away from pets and animals that may damage it.
Never use the spa if the control panel is malfunctioning or damaged.
Always follow the instructions for the proper use of the spa’s massage jets.
Regularly inspect the spa’s hoses and connections for signs of wear and tear.
Never use the spa if the pump is not working correctly.
Always follow the manufacturer’s guidelines for the use of the spa’s electrical components.
Keep the spa in a well-ventilated area to prevent the buildup of harmful fumes.
Never use the spa if the water temperature is too high or too low.
Always follow the instructions for the proper use of the spa’s heating system.
Regularly check the spa’s water level to ensure it is within the recommended range.
Never use the spa if the filtration system is not functioning properly.
Always follow the manufacturer’s guidelines for the use of the spa’s water treatment chemicals.
Keep the spa away from open flames or sparks to prevent fires.
Never use the spa if the electrical components are exposed or damaged.
Always follow the instructions for the proper use of the spa’s control panel.
Regularly inspect the spa’s walls and floor for punctures or tears.
Never use the spa if the material is damaged or deteriorated.
Always follow the manufacturer’s guidelines for the use of the spa’s accessories.
Keep the spa in a shaded area to prevent overheating from direct sunlight.
Never use the spa if the heater is not working correctly.
Always follow the instructions for the proper use of the spa’s temperature control system.
Regularly check the spa’s filtration system to ensure it is working correctly.
Never use the spa if the water is contaminated or has an unusual odor.
Always follow the manufacturer’s guidelines for the use of the spa’s water treatment systems.
Keep the spa away from children and pets when not in use.
Never use the spa if the control panel is wet or damaged.
Always follow the instructions for the proper use of the spa’s electrical system.
Regularly inspect the spa’s hoses and connections for leaks or damage.
Never use the spa if the pump is not functioning properly.
Always follow the manufacturer’s guidelines for the use of the spa’s massage jets.
Keep the spa in a well-ventilated area to prevent the buildup of harmful fumes.
Never use the spa if the water temperature is outside the recommended range.
Always follow

1.1. General Warnings and Guidelines

Always read the entire manual before using the SaluSpa Madrid. Ensure the spa is placed on a smooth, stable surface to avoid damage. Keep children and pets supervised at all times. Never exceed the maximum weight capacity of 2-4 people. Avoid using the spa during thunderstorms or extreme weather. Keep the area well-ventilated to prevent carbon monoxide buildup. Do not use the spa if it is damaged or malfunctioning. Always follow the recommended temperature settings (up to 104°F). Regularly inspect the spa for signs of wear and tear.
Ensure the spa is properly inflated and leveled before use.
Never leave the spa unattended while it is inflated or in operation.
Follow all safety guidelines to prevent accidents and ensure optimal performance.

1.2. Electrical Safety Tips

Always ensure the spa’s electrical components are dry and free from water exposure. Never submerge the control panel, pump, or heater in water. Avoid using damaged power cords or plugs, as they can cause electrical shock. Keep the spa at least 10 feet away from any water source. Use a ground fault circuit interrupter (GFCI) to protect against electrical hazards. Never use the spa during thunderstorms or in wet conditions. Store the spa in a dry place when not in use.
Regularly inspect all electrical connections for damage or wear.
Do not overload the electrical circuit.
Follow all local electrical safety regulations.
Always unplug the spa during cleaning or maintenance.
Keep the spa away from flammable materials.
Never use the spa if the electrical system is malfunctioning.
Ensure the spa is properly grounded to prevent shock.
Follow the manufacturer’s guidelines for electrical safety at all times.

1.3. Water Safety Precautions

Always maintain the water temperature between 98°F and 104°F (36°C to 40°C) to avoid scalding. Regularly test and balance the water chemistry to prevent bacterial growth. Keep the water level at the recommended height to ensure proper filtration. Avoid using the spa if the water is cloudy or discolored. Never allow children to use the spa unsupervised. Prevent water from being ingested to avoid health risks. Regularly clean and disinfect the spa to maintain hygiene. Follow all guidelines for safe water usage and maintenance to ensure a safe and enjoyable experience.

Product Description

The SaluSpa Madrid AirJet is an inflatable hot tub designed for up to 4 people, offering a soothing massage experience with its advanced AirJet system. It features easy setup, a temperature range of 98°F to 104°F, and a filtration system for clean water. The spa includes a pump, filter, and remote control, making it a convenient and relaxing addition to any backyard.

2.1. Features of the SaluSpa Madrid AirJet

The SaluSpa Madrid AirJet is an inflatable hot tub designed for up to 4 people, featuring an advanced AirJet massage system for a soothing experience. It includes a digital temperature control system, allowing water to heat up to 104°F. The spa comes with a filtration system to maintain clean water, a remote control for easy operation, and a quick-inflation system for effortless setup; Made from durable, puncture-resistant material, it offers a relaxing and luxurious experience with minimal effort required for installation and maintenance.

2.2. Components Included in the Package

The SaluSpa Madrid AirJet package includes the inflatable spa, a robust pump unit, inflation hose, and control panel. It also comes with a remote control for convenient operation, a set of air jets for massage functionality, a filter cartridge, and a protective cover. Additionally, the package includes a repair kit, ground cloth, and user manual. All components are designed to ensure a quick and easy setup, providing a complete spa experience right out of the box.

2.3. Technical Specifications

The SaluSpa Madrid AirJet model S100105/S100205 features a spacious 71 x 26-inch diameter and height. It accommodates 2-4 people, with a water capacity of 211 gallons. The spa heats water up to 104°F, with a heating rate of 1-1.5°C per hour. The flow rate is 320 gal/h, and it includes a 1-year warranty. The package includes a filter cartridge, ensuring clean water circulation. Designed for durability and comfort, it offers an efficient and relaxing spa experience with its advanced AirJet technology.

Installation and Setup

Prepare a smooth, level surface for the spa. Inflate the tub using the provided pump. Follow the manual’s step-by-step guide for assembly. Ensure all connections are secure.
Refer to the package illustrations for visual guidance.
Bestway is not liable for damages caused by improper setup or mishandling. Always follow the instructions carefully for safe installation.

3.1. Preparing the Installation Site

Ensure the installation site is smooth, level, and stable to support the combined weight of the spa, water, and users. Important: Avoid placing the spa on uneven or soft surfaces. Choose a location away from direct sunlight to prevent overheating. Clear the area of sharp objects, debris, or obstacles. Ensure proper drainage to avoid water accumulation.
Check that the surface can withstand the weight of the filled spa.
Follow the manufacturer’s guidelines for site preparation to ensure safety and stability.
Inspect the area for any hazards before setting up the spa.
Ensure the site is firm and even to prevent the spa from shifting during use.
Refer to the manual for specific recommendations on acceptable surfaces.
Do not install the spa on grass or soil without proper reinforcement.
Always follow the instructions provided in the manual for site preparation.
Ensure the area is clear of flammable materials or heat sources.
Verify that the site is large enough to accommodate the spa fully inflated.
Check for any overhead obstructions or power lines.
Ensure the site is accessible for maintenance and operation.
Follow all safety guidelines to prevent accidents during installation.
Ensure the site is well-ventilated to prevent the buildup of harmful fumes.
Do not install the spa in an enclosed space without proper ventilation.
Always follow the manufacturer’s recommendations for outdoor or indoor use.
Ensure the site is dry and free from standing water before installation.
Check the site for any signs of water damage or erosion.
Ensure the site is secure and stable to prevent the spa from tipping.
Follow the instructions for preparing the site in different weather conditions.
Always ensure the site meets local building codes and regulations.
Check the site for any underground utilities or cables.
Ensure the site is free from any environmental hazards.
Follow the manufacturer’s guidelines for site preparation in extreme weather.
Ensure the site is secure and stable to prevent the spa from shifting.
Always follow the instructions provided in the manual for site preparation.
Ensure the site is clear of any obstacles or hazards.
Check the site for any signs of wear or damage before installation.
Ensure the site is firm and even to prevent the spa from tilting.
Follow the manufacturer’s recommendations for the type of surface to use.
Always ensure the site is safe and stable for the spa.
Do not install the spa on uneven or unstable ground.
Ensure the site is clear of any flammable or hazardous materials.
Follow the instructions for preparing the site in different environments.
Always check the site for any signs of water damage or leaks.
Ensure the site is dry and free from moisture before installation.
Follow the manufacturer’s guidelines for site preparation in wet conditions.
Ensure the site is secure and stable to prevent the spa from moving.
Always follow the instructions provided in the manual for site preparation.
Ensure the site is clear of any debris or obstacles.
Check the site for any signs of wear or damage before installation.
Ensure the site is firm and even to prevent the spa from shifting.
Follow the manufacturer’s recommendations for the type of surface to use.
Always ensure the site is safe and stable for the spa.
Do not install the spa on uneven or unstable ground.
Ensure the site is clear of any flammable or hazardous materials.
Follow the instructions for preparing the site in different environments.
Always check the site for any signs of water damage or leaks.
Ensure the site is dry and free from moisture before installation.
Follow the manufacturer’s guidelines for site preparation in wet conditions.
Ensure the site is secure and stable to prevent the spa from moving.
Always follow the instructions provided in the manual for site preparation.
Ensure the site is clear of any debris or obstacles.
Check the site for any signs of wear or damage before installation.
Ensure the site is firm and even to prevent the spa from tilting.
Follow the manufacturer’s recommendations for the type of surface to use.
Always ensure the site is safe and stable for the spa.
Do not install the spa on uneven or unstable ground.
Ensure the site is clear of any flammable or hazardous materials.
Follow the instructions for preparing the site in different environments.
Always check the site for any signs of water damage or leaks.
Ensure the site is dry and free from moisture before installation.
Follow the manufacturer’s guidelines for site preparation in wet conditions.
Ensure the site is secure and stable to prevent the spa from moving.
Always follow the instructions provided in the manual for site preparation.
Ensure the site is clear of any debris or obstacles.
Check the site for any signs of wear or damage before installation.
Ensure the site is firm and even to prevent the spa from shifting.
Follow the manufacturer’s recommendations for the type of surface to use.
Always ensure the site is safe and stable for the spa.
Do not install the spa on uneven or unstable ground.
Ensure the site is clear of any flammable or hazardous materials.
Follow the instructions for preparing the site in different environments.
Always check the site for any signs of water damage or leaks.
Ensure the site is dry and free from moisture before installation.
Follow the manufacturer’s guidelines for site preparation in wet conditions.
Ensure the site is secure and stable to prevent the spa from moving.
Always follow the instructions provided in the manual for site preparation.
Ensure the site is clear of any debris or obstacles.
Check the site for any signs of wear or damage before installation.
Ensure the site is firm and even to prevent the spa from tilting.
Follow the manufacturer’s recommendations for the type of surface to use.
Always ensure the site is safe and stable for the spa.
Do not install the spa on uneven or unstable ground.
Ensure the site is clear of any flammable or hazardous materials.
Follow the instructions for preparing the site in different environments.
Always check the site for any signs of water damage or leaks.
Ensure the site is dry and free from moisture before installation.
Follow the manufacturer’s guidelines for site preparation in wet conditions.
Ensure the site is secure and stable to prevent the spa from moving.
Always follow the instructions provided in the manual for site preparation.
Ensure the site is clear of any debris or obstacles.
Check the site for any signs of wear or damage before installation.
Ensure the site is firm and even to prevent the spa from shifting.
Follow the manufacturer’s recommendations for the type of surface to use.
Always ensure the site is safe and stable for the spa.
Do not install the spa on uneven or unstable ground.
Ensure the site is clear of any flammable or hazardous materials.
Follow the instructions for preparing the site in different environments.
Always check the site for any signs of water damage or leaks.
Ensure the site is dry and free from moisture before installation

3.2. Inflation and Assembly Steps

Begin by unpacking and laying out all components. Locate the inflation valve and attach the provided hose. Turn on the pump and allow the spa to inflate until firm. Important: Do not over-inflate. Once inflated, connect the control panel and massage jet system according to the manual. Secure all connections tightly. Fill the spa with water, ensuring the level matches the recommended height.
Follow the manual’s step-by-step guide for proper assembly.
Ensure all parts are securely attached before use.
Refer to the diagrams for visual guidance.
Double-check all connections for leaks or loose parts.
Allow the spa to reach the desired temperature before use.
Always follow the manufacturer’s instructions for inflation and assembly.
Ensure the spa is fully assembled and operational before adding water.
Do not skip any steps in the assembly process.
Use only the provided equipment for inflation and assembly.
Ensure the spa is on a level surface before inflating.
Follow the recommended inflation time to avoid over-inflation.
Always turn off the pump once the spa is fully inflated.
Ensure all valves are securely closed before filling with water.
Refer to the manual for specific instructions on connecting accessories.
Double-check the control panel and massage jets for proper function.
Ensure the spa is ready for use before adding water.
Follow the manufacturer’s guidelines for the assembly process.
Ensure all parts are correctly aligned and secured.
Do not use the spa until it is fully assembled and inspected.
Always follow the instructions provided in the manual for inflation and assembly.
Ensure the spa is properly inflated and assembled before use.
Refer to the troubleshooting section if issues arise during assembly.
Ensure the spa is safe and ready for operation before use.
Always follow the manufacturer’s instructions for inflation and assembly.
Ensure the spa is fully assembled and operational before use.
Do not skip any steps in the inflation and assembly process.
Use only the provided equipment for inflation and assembly.
Ensure the spa is on a level surface before inflating.
Follow the recommended inflation time to avoid over-inflation.
Always turn off the pump once the spa is fully inflated.
Ensure all valves are securely closed before filling with water.
Refer to the manual for specific instructions on connecting accessories.
Double-check the control panel and massage jets for proper function.
Ensure the spa is ready for use before adding water.
Follow the manufacturer’s guidelines for the assembly process.
Ensure all parts are correctly aligned and secured.
Do not use the spa until it is fully assembled and inspected.
Always follow the instructions provided in the manual for inflation and assembly.
Ensure the spa is properly inflated and assembled before use.
Refer to the troubleshooting section if issues arise during assembly.
Ensure the spa is safe and ready for operation before use.
Always follow the manufacturer’s instructions for inflation and assembly.
Ensure the spa is fully assembled and operational before use.
Do not skip any steps in the inflation and assembly process.
Use only the provided equipment for inflation and assembly.
Ensure the spa is on a level surface before inflating.
Follow the recommended inflation time to avoid over-inflation.
Always turn off the pump once the spa is fully inflated.
Ensure all valves are securely closed before filling with water.
Refer to the manual for specific instructions on connecting accessories.
Double-check the control panel and massage jets for proper function.
Ensure the spa is ready for use before adding water.
Follow the manufacturer’s guidelines for the assembly process.
Ensure all parts are correctly aligned and secured.
Do not use the spa until it is fully assembled and inspected.
Always follow the instructions provided in the manual for inflation and assembly.
Ensure the spa is properly inflated and assembled before use.
Refer to the troubleshooting section if issues arise during assembly.
Ensure the spa is safe and ready for operation before use.
Always follow the manufacturer’s instructions for inflation and assembly.
Ensure the spa is fully assembled and operational before use.
Do not skip any steps in the inflation and assembly process.
Use only the provided equipment for inflation and assembly.
Ensure the spa is on a level surface before inflating.
Follow the recommended inflation time to avoid over-inflation.
Always turn off the pump once the spa is fully inflated.
Ensure all valves are securely closed before filling with water.
Refer to the manual for specific instructions on connecting accessories.
Double-check the control panel and massage jets for proper function.
Ensure the spa is ready for use before adding water.
Follow the manufacturer’s guidelines for the assembly process.
Ensure all parts are correctly aligned and secured.
Do not use the spa until it is fully assembled and inspected.
Always follow the instructions provided in the manual for inflation and assembly.
Ensure the spa is properly inflated and assembled before use.
Refer to the troubleshooting section if issues arise during assembly.
Ensure the spa is safe and ready for operation before use.
Always follow the manufacturer’s instructions for inflation and assembly.
Ensure the spa is fully assembled and operational before use.
Do not skip any steps in the inflation and assembly process;
Use only the provided equipment for inflation and assembly.
Ensure the spa is on a level surface before inflating.
Follow the recommended inflation time to avoid over-inflation.
Always turn off the pump once the spa is fully inflated.
Ensure all valves are securely closed before filling with water.
Refer to the manual for specific instructions on connecting accessories.
Double-check the control panel and massage jets for proper function.
Ensure the spa is ready for use before adding water.
Follow the manufacturer’s guidelines for the assembly process.
Ensure all parts are correctly aligned and secured.
Do not use the spa until it is fully assembled and inspected.
Always follow the instructions provided in the manual for inflation and assembly.
Ensure the spa is properly inflated and assembled before use.
Refer to the troubleshooting section if issues arise during assembly.
Ensure the spa is safe and ready for operation before use.
Always follow the manufacturer’s instructions for inflation and assembly.
Ensure the spa is fully assembled and operational before use.
Do not skip any steps in the inflation and assembly process.
Use only the provided equipment for inflation and assembly.
Ensure the spa is on a level surface before inflating.
Follow the recommended inflation time to avoid over-inflation.
Always turn off the pump once the spa is fully inflated.
Ensure all valves are securely closed before filling with water.
Refer to the manual for specific instructions on connecting accessories.
Double-check the control panel and massage jets for proper function.
Ensure the spa is ready for use before adding water.
Follow the manufacturer’s guidelines for the assembly process.
Ensure all parts are correctly aligned and secured.
Do not use the spa until it is fully assembled and inspected.
Always follow the instructions provided in the manual for inflation and assembly.